PET Bottle Rinser Filler Capper
Glass Bottle Rinser Filler Capper
CSD Can Filler Seamer
Co2 Carbonator
PET Bottle Rinser Filler Capper 3 In 1
Glass Bottle Rinser Filler Capper
Juice Can Filler Seamer
Preparation System
UHT/HTST Sterilizer
CIP/COP/SIP/SOP
It is used for pre-washing and cap removing of 5 gallon recovery plastic bottles.
It is suitable for cap removing and pre-washing of 3 gallon, 5 gallon recovery barrels. The machine is made of stainless steel, resistant to corrosion and easy to wash. Besides, its operation is simple and performance is stable.
After the machine connected with power supply and air supply, manually upend the barrel in the de-capping head and step on the pedal by foot, under the action of de-capping cylinder, the caps are pulled off and enters into the recovery tank through the slideway. With this operation, the caps almost suffers no damage and could be used again.
Open the cover of barrel-washing machine, set the barrel which caps are pulled on middle brush of the machine with barrel mouth down and close the cover, then water pump starts working and water enters into the machine, the brush rotates clockwise and the barrel does the same with the driving force of the brush; during the rotation, external brush, bottom brush and side brush scrub the outside of the barrel while internal brush scrubs the inside, in this way, the barrel is completely cleaned and its pre-washing finish.
Technical Parameter
No. | Item. | Specification |
1 | Production speed | 200-300B/H |
2 | Brush | 8pcs (external and internal, top and bottom) |
3 | Spec. of barrel | 5 gallon (Ø270×490×56) |
4 | Lid-pulling head | 1 PCS |
5 | Water pump power | 0.37Kw, stainless steel pump |
6 | Compressed air pressure | 0.6MPa |
7 | Rated voltage | 3Phase, 380V, 50HZ |
8 | Brush motor power | 0.75Kw |
9 | Overall dimensions | 800 × 800 ×1200mm |
10 | Weight | 110Kg |
<< Previous
Next >>